Top 10 common forklift accidents ， forklift operation ought to take note of these matters ！.

Don't undervalue the forklift at work. If the procedure is not good, there will be significant mishaps in mins, and there are lots of accidents involving forklifts.

Case 1: The forklift freight obstructed the chauffeur's sight, and the person in front could not be located, causing a rolling accident.
Instance 2: In order to maintain the equilibrium of the forklift when raising heavy items, the workers utilized their body weight as the counterweight, which practically created casualties.
Case 3: The width of the forklift cargo goes beyond the allowable size of the path and hangs on the roadside rack, which practically causes an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift vehicle driver did not discover the pedestrian, and the pedestrian did not discover the forklift.
Situation 6: The forklift raises the workers unlawfully, the forklift chauffeur does not use the seat belt, the forklift lifter drops and the vehicle driver is squashed when the forklift rolls over.
Case 7: The forklift chauffeur did not use a seat belt and fell from the car when it surrendered and was crushed.
Forklift operation must take note of these matters ：.

Start.
1. Before beginning, observe the environments, and after verifying that there are no challenges that impede the safety of driving, honk the horn initially and afterwards start.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale should be risk-free before beginning.
3. When the forklift starts with a tons, the driver should initially verify that the load is steady and dependable.
4. The begin should be sluggish and constant.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast must be slanted in reverse. .
2. Do not lift the fork too high when driving. When getting in and leaving the task website or while driving, be careful that there will be no challenges in the sky. When the lots is traveling, the fork should not be elevated too high, which will affect the stability of the forklift. .
3. After unloading, the fork must be decreased to the typical driving position prior to driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal needs to be issued first. High-speed sharp turns are banned. High-speed doglegs will create the vehicle to lose lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to shut off the fire and slide, and it is prohibited to brake all of a sudden while driving with tons unless there are unique situations.
6. When the forklift is running, it has to obey the web traffic rules in the manufacturing facility and must maintain a certain safety and security range from the vehicle in front. .
7. When the forklift is running, the lots should remain in the lowest setting that does not prevent the driving, and the gantry should be properly tilted back. The load shall not be raised except when stacking or loading. .
8. The elevation of the load need to not obstruct the motorist's view. In special conditions, when the product influences the forward vision, drive at a reduced speed when reversing.
9. It is prohibited to switch on the ramp, neither to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it has to drive securely at a low speed when entering the manufacturing workshop area. .
11. When the forklift is lifted, lifted or driven, it is prohibited for employees to depend on the fork to hold things and play a stabilizing duty. .
12. If troubles are discovered, they will be repaired and reported in a timely manner, and they will certainly never ever run with health problems or conceal them.

filling and dumping.
1. When fork-loading products, the range between both forks need to be changed as required to make the load of both forks balanced and not manipulated, and one side of the thing ought to be against the shelf. .
2. It is forbidden to deal with a single fork or utilize a fork top or pull. In special conditions, security warning signs should be established to advise surrounding pedestrians. .
3. In the process of filling and dumping things, the forklift should be braked with the brake. .
4. The rate of the vehicle must be slow-moving and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled objects and harm people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as possible under the lots, and it should be kept in mind that the fork idea need to not touch various other products or items. The lots needs to be supported with marginal back tilt of the gantry to make sure that the lots does not glide backwards. The pole can be tilted ahead a little when the load is reduced to enable easy placement of the load and removal of the forks. .
6. It is restricted to fork items at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for people to loaf the fork, so as to avoid the collapse of the goods and hurt people. .
8. Straining is prohibited, and it is restricted to utilize forks to raise personnel to participate in high-altitude operations to avoid high-altitude falling accidents. .
9. It is not enabled to utilize the brake inertia to slide, place, round or roll things. .
10. It is not enabled to utilize forks to choose, transform pallet dump.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you must unload the goods or lower the fork frame.
2. Pull the parking brake handle to dead or dispirit the emergency brake switch.
3. The engine is shut off and the power is cut off. (Except for special circumstances, such as the vehicle driver does not leave the lorry's line of vision and does not surpass 1 minute).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look needs to be examined, and gas, lubricating oil and cooling water must be added.
2. Check the security performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and efficient.
4. Throughout the procedure of the forklift, examine whether the pressure and temperature are normal.
5. After the forklift is running, the exterior leakage must also be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must inspect prior to leaving the vehicle;.
2. When you encounter a person in front of you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The transforming need to not be as well sharp to prevent the Electric Forklift Truck for Warehouse propensity of " totally Stand-on Electric Pallet Stacker free switching";.
6. Adding and down the incline must be slow and consistent, and no turning on the slope is permitted.
7. Do not drive across the gradient. When the slope is greater than 10%, the vehicle should be driven backwards when worsening;.
8. When the forklift workers carry the goods and progress, if they encounter large or heavy goods and go to the motorist's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" should be followed in the procedure.
1. Solitary fork operation is not enabled.
2. It is not allowed to lift the goods for far away driving.
3. It is not allowed to pick up the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not permitted to utilize inertia pressure to pick up the goods.
6. It is not enabled to use stopping pressure to exile round or easy-to-roll objects.
7. It is not enabled to bring people to work on the pallet or fork, and it is strictly restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Vehicle parking is not allowed under the list below problems.
1. Contours, slim roads, railway crossings;.
2. Areas with a longitudinal incline higher than 5%.
3. When there is an challenge on one side of the roadway, the opposite side of the area with the same size as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844